PhonesAllDay
Technical User
CM 6.3
I was entering ranges into the IP Network Region Map
It seemed no rhyme or reason why sometimes when entering in ranges
- Sometimes it would accept the range of several hundred IP's
- Sometimes it ignored my entry and only kept the first 0-255
- When this happened I had to type in every 0-255 range
For example:
192.168.0.0 - 192.168.8.255 /24 = Range I'd like it to accept (it would sometimes)
When I press Enter, sometimes it would only publish is this:
192.168.0.0 - 192.168.0.255
End up having to type in:
192.168.1.0 - 192.168.2.255
192.168.3.0 - 192.168.3.255
192.168.4.0 - 192.168.4.255
...and so on
Just wondering if there is something I may be missing here.
Thanks,
PhonesAllDay
I was entering ranges into the IP Network Region Map
It seemed no rhyme or reason why sometimes when entering in ranges
- Sometimes it would accept the range of several hundred IP's
- Sometimes it ignored my entry and only kept the first 0-255
- When this happened I had to type in every 0-255 range
For example:
192.168.0.0 - 192.168.8.255 /24 = Range I'd like it to accept (it would sometimes)
When I press Enter, sometimes it would only publish is this:
192.168.0.0 - 192.168.0.255
End up having to type in:
192.168.1.0 - 192.168.2.255
192.168.3.0 - 192.168.3.255
192.168.4.0 - 192.168.4.255
...and so on
Just wondering if there is something I may be missing here.
Thanks,
PhonesAllDay