Intuity Audix on 3 PPN's

[98Converter]

NEED HELP...
We currently have 3 PBX's that reside on 1 Intuity (NODE 1)via a CLAN board. I have an IP for the Intuity and NODE 1. Nodes 2&3 can have generic IP's as long as they are reflected in NODE 1. Will that work???
Switch Link Administration:So I think if I just change NODE 1 to the physical IP and change the Intuity to reflect NODE 1's IP and vice/versa, that should be all I need to change there???
Networking Addressing: Change the IP to the physical IP w/default gateway.
Then of course unplug the Ethernet from CLAN, plug it directly into IP jack (7.1.1.30), and Plug Intuity into other IP jack (7.1.1.31)
Does this make sense? Thanks for all help...

 

[clausen]

It dosen't matter what the IP address is a long as it is an valid address and both ends can see each other. If Intuity 1 can ping Intuity 2 and 3, you should have no problems.

Chris