Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Interface up down

Status
Not open for further replies.
sewit

sewit

IS-IT--Management
Jan 29, 2005
6
ET
My universities core switch Cat6509 interface is up and line protocol is down. What could be the solution?
 
Sort by date Sort by votes
what kind of link is it?
could be simple like wrong encapsulation...

have you verified the configs of both ends of the link?
 
Upvote 0 Downvote
no wrong encapsulation, the link is simple fiber link. It is not PPP or something like that.
 
Upvote 0 Downvote
Has it work in the past or is this a new implementation? I find if you have no shutdown cmd it is up down even with cable out, so it could be interface or cable at fault.
 
Upvote 0 Downvote
It is a new implementation but it was working for sometimes. I think I have got the problem. It was stack at rummon because of trying to load corrupted image. The solution is to follow the Xmodem procedure.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

PThomp3344
  • Locked
  • Question
Trying to connect to Cisco Unified Controller web interface: UC520W-16U-4FXO-K9
Replies
1
Views
509
nt8d09
nt8d09
bfordz
  • Locked
  • Question
new help on setting up third party VoIP phones through Catalyst 2960x switch
Replies
0
Views
287
bfordz
bfordz
quazimotto
  • Locked
  • Question
Cisco ASA_5505 VPN to Juniper_SRX210 VPN IS UP_ No Traffic!!!!!!
Replies
0
Views
261
quazimotto
quazimotto
msk69
  • Locked
  • Question
CISCO 7942 Phone Upgrading to SIP
Replies
0
Views
303
msk69
msk69
darthvader167
  • Locked
  • Question
Download Cisco Hold Music
Replies
0
Views
545
darthvader167
darthvader167

Part and Inventory Search

Sponsor

Back
Top