Install TN750C annc board

[a1pickle]

Can anyone give me the procedures for installing a TN750C annc board?

 

[mikeydidit]

The tn750c can be installed into any purple slot or slot you would use for station packs. If you find any mistakes, please consider that they are there for a purpose. And everyone needs a purpose.
Hope this helps, Mikey.

 

[lever]

I'm sure it has to be added as a Data-Module.

Add Data-Module extnhere porthere typeannboard.

or something like that. It's been a while since I added one.

lever.

 

[a1pickle]

Thanks...so I don't have to power off the switch to install the card. And, I do have to use the Add Data-Module command.

 

[lever]

No, it's only the white slots, i.e processors, tone cards on so on that require a power down. Although i seem to remember reading on this forum that some Definity's no longer have purple slots.

List out any currant Data-Modules you have, (you can Add-Module Next to pick the next free number.)
ADD-MODULE, enter a free number. In the field you will see that you need to enter a type (Announcement) COR, COS, TN and i can't remember the rest. Sorry, but your almost there.

lever.

 

[d3finity]

do you have purple slots ? yes...insert the board into any of these slots.
thats it done!!
forget the DATA-MODULE stuff.

regds
c

 

[lever]

Hi c,

Does this depend on the version ? I'm running on v7 and when i added a TN750C to the G3, Avaya got me to do the Data-Module stuff.
Just a question.

lever.

 

[anisbet2171]

Adding a data-module allows you to save the announcment board to either a flash cars or tape. Add the data module to port 17 of the announcement board.