Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gmmastros on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Egypt sample DS1 board configuration (Telecom Egypt)

Status
Not open for further replies.

bankingguy

IS-IT--Management
Nov 26, 2017
129
SG
Hi,

Anyone have a sample E1 configuration of Telecom Egypt? Trunk is up on my side, inbound call is working but outbound calling is not. Before escalating to Telco, i wanted to cross check if my DS1 board configuration is correct or not. I'm running CM8.
 
I don't have an example for Egypt, but if inbound is working then it is very likely the DS1 is configured correctly.

For basic troubleshooting, try tracing your phone while making a call - list trace station XXXXX. Look for:
[ul]
[li]ARS - call should go out ARS (Automatic Route Selection)[/li]
[li]Route Pattern - The correct route for that type of call (local, long distance, international)[/li]
[li]Trunk Group - This specific Trunk Group[/li]
[li]Any Error - "Deny" or other verbiage. Should also include some details, such as if the FRL is incorrect or if the carrier denied the call.[/li]
[/ul]


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top