I/O Operation failure 1

[muraliambt]

Hi,

I am using FPW26a. when i try open my project file it's giving me this error.

Rgds,
Murali.

 

[dgrewe]

If there is another programmer in your area, do they have the project file open. Only one person can have a project table open at one time.

If there is noone else there that would have the file open, Rebuilt it or callin a backup copy. David W. Grewe
Dave@internationalbid.com

 

[rgbean]

Murali,
I'm just curious, is the project on a local drive, or on the network?

Rick

 

[muraliambt]

Hi,

Sorry guys for the late replay. The project file is on the network.

Murali.

 

[muraliambt]

Hi,

Sorry guys for the late replay. The project file is on the network. But i am able to open the same project in different place.

Murali.

 

[rgbean]

Murali,
It is likely that this "IO Error" is being caused by your network connection / configuration. Check to see if you are running the same network client version and that it's configured the same as those that work. Next, check the NIC, cabling, the switch / hub port and any other piece of the network connection that the "bad" workstation goes through different from a "good" one.

Rick

 

[rgbean]

I'd forgotten that potential source for that error. Now that you've reminded me, you and Murali might want to visit

http://www.abri.com/foxpro.html

and get the free "FixDrive" program - it solved our problems with this specific situation (it's just been a while!).

Rick