Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HP Psc 750 all in one printer

Status
Not open for further replies.

Buff1

Programmer
Feb 7, 2003
295
US
Is there a way to make this printer recognize the
line draw (box) characters from 128-255.

I'm using PCL 5 or below and it seems to recognize the
font changes but using Ec(10U Ec(s10h12v0s0b0T it wont
use the box draw characters when forming lines like on a
federal form facsimile. Any ideas (HP says they are using
the latest driver).
 
The font size command above should have included 0p for
fixed (vs proportional) just left it out in above but is
in the program im having problems with.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top