How to setup Page Key on Mitel 5320

[dan737]

I setup a page group on the Mitel 3300 and I am trying to program a paging key on their phones

I set the Line Type to Paging and the Button directory to *75861 <--to page out and I get the following error

Key 4, The Directory number must be blank

Any suggestions

Thank you

 

[sarond]

If you want to program a 'Paging' key you don't enter anything in the DN field.
You would press the paging key and then enter the zone.

If you want to have it page via a FAC then change your key type to 'User Speedcall' and enter the *75861 FAC

 

[jpruder]

If you don't want user to change the speed dial make it a cde speedcall

 

[kwbMitel]

The Paging type is for Loudspeaker Paging off of physical contacts on the system

Paging over phones is done via FAC's and would use speedcalls

**********************************************
What's most important is that you realise ... There is no spoon.

 

[dan737]

Thank you, that worked