How to do ISDN Tie between 2 Prologic Version 7?

[Simonchtan]

I have 2 Definity CSI and wanted to do Tie Line config with 2 ISDN card? Does anyone knows know to go about ding this?


I know no voice, I knew nothing about systems,
i know NUTS on networking, Therefore I dont know anything!
-----------------------------------
©2003,2004 SCHT.

 

[orypecos]

It seems to me that they only way to do it was ISDN + but that was many moons ago. That is all I remember. Maybe someone else will help u with a post.

My name is David, and I have approved this message.

P.S. And a message to all posters,if you want to get the best response to a question, please read FAQ222-2244 first. Also give the type and version of your voice mail and pbx systems and preview your post to clear up and correct English mistakes that could make your post not understandable. I

 

[bwilch]

If I understand correctly, you are basically wanting to create a "phantom" Tie line between the switches using an ISDN card? If so, which card are you using, and what are you wanting to acomplish by setting up this circuit?

 

[Simonchtan]

Sorry for the late reply....

Actually i need to tie 2 PBx together.

only 1 of the PBx has VDNs and ISDN from Telco.
The second PBx is to Tie into the 1st PBx so that both of them can intercall each other and forward calls to each other.

I not really sure whcih hardware to use here. are they normal E1 card? or special card.

I know no voice, I knew nothing about systems,
i know NUTS on networking, Therefore I dont know anything!
-----------------------------------
©2003,2004 SCHT.

 

[Simonchtan]

i have 2 Definity CSi unit. I need to do a 30 channel tie trunk between both of the unit. i need calls to overflow to this new unit.

One of the Definity is Ver8 and the other is Ver 6.

I need to know how and what other hardware i need other then E1 Card.

Please assist.

I know no voice, I knew nothing about systems,
i know NUTS on networking, Therefore I dont know anything!
-----------------------------------
©2003,2004 SCHT.

 

[dimas]

Hi,
How far the PBXs located between each other?
Do you have two pairs of wires between the PBXs?