Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I set up Avaya Site Administration

Status
Not open for further replies.

ngtaylor1

MIS
Jun 24, 2003
14
US
I would like to replace the SAT, (or dumb terminal) with a PC connecting to the serial cable and install Avaya Site Administration. I have the CD, but can anyone guide me thru this installation process?
 
It's fairly simple. You just need the IP address of the C-LAN and the port is 5111.



Ronster
 
I had the same question.
thread690-556649

Attitude is everthing.
-Snapper
 
Install the software and use the setup wizzard. Should be self explanitory. The risk areas are auto log-in, and ...that's about it. really.
 
You can use the serial cable to connect the COM port on the PC to the TERM port on the back of the cabinet. Setup ASA to use 'Direct Serial Port Connection'.

Kevin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top