How do I interpret these two errors

[Guest_imported]

These are two errors that I am getting when I do a display errors. Dont know if they are major or or not though.
Basicly the two error numbers are 16 and 769.
HARDWARE ERROR REPORT - ACTIVE ALARMS

Port Mtce Alt Err Aux First Last ErrErrRt/AlAc Name NameType Data Occur Occur Cnt Rt Hr St

FL-DATA 8 16 03/30/01:05 05/14/01:05 25 00a n
01A0213DIG-LINE 769 40988 03/12/21:12 05/14/16:01 255 0 3 a y

Where can I get a list or type of error codes that shows the numbers where say for instance 513 I know is missing hardware but I don't know what all the other number code means. Any idea where I can find that information for future reference of all the error codes.
Thanks for any input

 

[janney]

Try this link for Starterz. In the "Alarms & Errors" section it outlines what each field represents and provides the name of the DOC that you should refer to for error code detail. (Requires Adobe Acrobat Reader)

http://support.avaya.com/cgi-bin/gx.cgi/AppLogic+PdfPrint?pdfdoc=d71lild2.pdf

This should get you off to a solid start!

Regards

 

[Callmaster]

Hi Starterz, you can find all documentation you need on this link:

http://support.avaya.com/elmodocs2/index.jhtml

Have Fun !

Callmaster

 

[telcoguy]

These are the errors as described by avaya:

.FL-DATA
Save to Flash card failed or in case of a dual processor system the cards do not match

.DIG-LINE
maintenance monitors and tests ports on Digital Line circuit packs and the hardware connected to those ports for lines administered as a digital station. These include stations with just a digital voice terminal and stations with a digital voice terminal and a linked data module.

Rob

 

[Guest_imported]

Thanks for all the Info and help....