Sep 13, 2011 #1 ken5267 IS-IT--Management Joined Sep 13, 2011 Messages 1 Location US Hi Peep..my 2 aloha terminals are in training mode and dont know how to switch to regular mode?? can someone help please?
Hi Peep..my 2 aloha terminals are in training mode and dont know how to switch to regular mode?? can someone help please?
Sep 13, 2011 #2 coorsman Technical User Joined Nov 25, 2008 Messages 1,113 Location US Do you mean redundancy mode. With the red border? Do a fileserver recovery in aloha manager under utilities. Cheers, Coorsman Upvote 0 Downvote
Do you mean redundancy mode. With the red border? Do a fileserver recovery in aloha manager under utilities. Cheers, Coorsman
Sep 21, 2011 #3 posknowitall Technical User Joined Dec 2, 2005 Messages 252 Location US If it's actual training mode then it's your jobcode. Check the job code listed under the employees you are using and be sure training is not checked. Upvote 0 Downvote
If it's actual training mode then it's your jobcode. Check the job code listed under the employees you are using and be sure training is not checked.