If you're on a 715 terminal, "HELP" will show the command choices. On ASA or Emulator "F5" does the trick. "display abbreviated-dialing" can be "personal", "group", "system" or "enhanced". System is generic, Group and Enhanced are by List number, and personal is by extension number.
now check abb lists against your station abb lists:
Feature code
list 1 = #1 on station list 1 is set to e.g. - system
list 2 = #2 on station list 2 is set to e.g. - personal
list 3 = #3 on station list 3 is set to e.g. - enhanced
so to access the enhanced list in this case - dial #3
now ....add enhanced groups in blocks of 100
'add abb enh 1' - set multiples of 5 to 100
this activates the first 100 block...so - #3100 to #3199
for the next 100 block - 'add abb enh 2' = #3200 to #3299
etc.. etc....this will give you a max of 1000 enh abb's
if you - 'add abb enh 01' etc... etc... this will give 10,000 enh abb dials.
List 3 applies to the station it is defined on. Look at page 3 of the station, and you'll see List 1: ________ List 2: _________ List 3: ________. Now, it probably says List 1: Personal, List 2: Group and List 3: Enhanced 1
If it's Enhanced 1 - change abb en 9, and then go to page 4 and edit line 990. If it's Enhanced 2, then cha abb en list 2 9 and edit line 990...
That should do it... I would write down the original entry for your records.
Thanks,
CJH
We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.