HLOC will not work

[Latvia1]

I am having trouble getting the HLOC to work. The only way I can dial this site is with the LSC. If I remove the LSC the call is rejected. Here is my programming. Thanks in advance.

REQ PRT
CUST 0
FEAT NET
TRAN AC2
TYPE HLOC

HLOC

HLOC 44
DMI 8



REQ PRT
CUST 0
FEAT CDP
TYPE LSC
LSC
LSC 44
DMI 9



REQ PRT
CUST 0
FEAT DGT
DMI 8


DMI 8
DEL 2
ISPN NO
CTYP LOC


REQ PRT
CUST 0
FEAT DGT
DMI 9


DMI 9
DEL 2
ISPN NO
CTYP LOC


TYPE NET_DATA
CUST 00
OPT RTD
AC1 INTL NPA SPN NXX
AC2 LOC
FNP YES
ISDN YES
VPNI 15
PNI 1
PINX_DN
MBG 0
BSGC 65535
PFX1
PFX2
HLOC 44
LSC 44
RCNT 5
PSTN NO
TNDM 15
PCMC 15
SATD 1
OCLI NO
TIDM NO
DASC
ROPT NRO
DITI YES
TRNX NO
EXTT NO
FTOP FRES
APAD 0 0
VNR NO
NIT 8
NAS_ATCL YES
NAS_ACTV NO
FOPT 0
CNDN
CNAT
CNIP YES
DMWM NO
MWNS NO
CNTC
NATC
INTC

 

[SL1M1]

See what happens when you change the call type in the DMI to CDP...I am curious to see why you are using AC2 LOC along with CDP aswell??
Cheers!!

 

[Latvia1]

I just use cdp for testing a few numbers, The eu uses the location codes. I tried changing DMI 8 to cdp to know avail. I need to remove the location code of 44 and just have it as a HLOC. Any more suggestions. Thanks

 

[jjinkins]

Do you have INAC set to yes in the RDB for your PRI?