Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HARDWARE ERROR REPORT

Status
Not open for further replies.

nutz4daff

IS-IT--Management
Feb 13, 2004
16
US
Hello, this is my 1st post and I believe it is a simple one. I need to know what 2 error types are: Error type 2305 on a TN2224 board and an error type 1 on the same board. For a week this board has gone up and down. Running an error report this is the only errors I have found for the board. Does anyone know the error codes?
 
Looks like you got clock issues on the system.
These cause errors on the TDM bus.
Depending on the source the error was reported from,
may be the tone clock board, or the synch is just off.
You can check that with the "status synch" command
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top