H.323 trunk between two CM not sending number

[vk2013]

CM 6.X and CM 5.2 integrated with H.323 trunk. This link is working well internal and external calls. But internal calls both side only showing caller name not showing caller number.

 

[montyzummer]

have you put an entry in your private / public unknown numbering tables , based on if you are using ars /aar , also i think on page 3 of the trunk group form , you need to enable the sending of the number the fiels is near the sending name fiels , also enable show connected number on the same page.

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[vk2013]

Internal calls using AAR analysis. Trunk group configuration page 3 enabled send name, send calling number and send connected number. Assigned entry in private-unknown numbering group stiil not sending number.

 

[montyzummer]

ok on pg 3 on trunk group also numbering set to private , in the aar ana table set call type to lev0 , then reflect this on the route pattern numbering format lev0-pvt . I have mine set up like this and all works fine , just checked this morning on lab kit.

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[vk2013]

Thanks for this information it is working now. I did route pattern numbering format lev0-pvt.

 

[montyzummer]

cool thanks for the update

APSS (SME)
ACSS (SME)
ACIS (UC)