Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

FTP setup behind a 2514 w/ Enterprise + FW 12.2.x

Status
Not open for further replies.

rburke

Programmer
Joined
Apr 28, 2002
Messages
426
Location
US
OK,

Here is a basic overview of my lab/internet setup:

internet---cable modem---2514---PIX 506---2924-XL-EN---Users
|
|
rest of my lab setup


I have a couple other routers, and a PIX 501 in the other setup part, but that isn't the problem.

My question is, is there a way to route all port 21 requests to a certain internal IP? (aka my FTP server) I know how to setup the PIX to use the Static TCP command, and I know how to setup the 2514 to route the cable internet, but I don't know the command(s) to route all requests on a certain port(21) to a certain internal IP. If anyone can help me out I'd appreciate it. If you need more information then please let me know... I'd be glad to help you, so you can help me. :)

burke

 
Well, I tohught there would be a little more help than what I got, but oh well... I was able to figure it out. Just for future reference, it is the "ip alias" command that I was looking for that bound an IP address to a port.

burke
 
Set up and extended access list. I don't have the command in my head, but you can do a seach at cisco site.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top