FTP setup behind a 2514 w/ Enterprise + FW 12.2.x

[rburke]

OK,

Here is a basic overview of my lab/internet setup:

internet---cable modem---2514---PIX 506---2924-XL-EN---Users
|
|
rest of my lab setup


I have a couple other routers, and a PIX 501 in the other setup part, but that isn't the problem.

My question is, is there a way to route all port 21 requests to a certain internal IP? (aka my FTP server) I know how to setup the PIX to use the Static TCP command, and I know how to setup the 2514 to route the cable internet, but I don't know the command(s) to route all requests on a certain port(21) to a certain internal IP. If anyone can help me out I'd appreciate it. If you need more information then please let me know... I'd be glad to help you, so you can help me.

burke

 

[rburke]

Well, I tohught there would be a little more help than what I got, but oh well... I was able to figure it out. Just for future reference, it is the "ip alias" command that I was looking for that bound an IP address to a port.

burke

 

[jamin123]

Set up and extended access list. I don't have the command in my head, but you can do a seach at cisco site.