Frame Relay on IP Office

[DICS]

FR link between IPO and Cisco Router works excellent.
And now I need to make two DLCIs.

1 DLCI - for data
2 DLCI - for voice

I don`t how to do it. Is anybody knows???

 

[crashtest1000]

Why do you need to to do this? Don't you us the same DLCI between the two sites for voice and data.

Have you tested the QOS is working between the two or is this what you are trying to do?

 

[DICS]

A little question.

In Frame Link Type field I can enter only RFC1490 so as to connection worked. PPP doesn`t work. WHY?

Cisco software is

IOS (tm) C805 Software (C805-Y6-MW), Version 12.0(4)XM, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
It doesn`t support FRF12.

Can anybody explain symply what is RFC1490?

 

[DICS]

And one more strange little question.

How to do equal data transfer from both ends?

When I try to download and upload at one time, traffic goes only from Cisco`s LAN.

 

[DICS]

People, help me!

When I select SyncPPP in WAN Mode, i.e. I establish PPP link, DiffService doesn`t want to work (when goes data and voice traffic on the other side they don`t understand my speech). Is it normal

On Frame Relay link DiffService works fine.

 

[Raffles666]

I can only answer this bit

RFC1490 is Request For Comments number 1490. It's a bit like a white paper with all the standards on.

Try -

http://www.faqs.org/rfcs/rfc1490.html

for a full explaination.

cheers



Old school Alchemy engineer - trying to keep up with the times