Format sd card on v2

[chaunymony]

So I tried to format the sd card on my ipOffice V2 via the card reader on my laptop and manager. Manager kept telling me that it wasn't a valid fat32 file system and we couldn't format and recreate. I tried a different sd card I had around, formatted it via windows to a fat32, then formatted it under manager and when I went to recreate I got the "invalid fat32 file system" What am I doing wrong or has anyone else experienced this? Thanks for the help!

 

[amriddle01]

Is this a valid Avaya SD card?

ACSS (SME)
APSS (SME)

http://www.ipoffice.tel

 

[Bas1234]

Is it a SD or an MMC?

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[chaunymony]

The original sd card was straight from avaya. in the nice avaya packaging. The second one was just a regular SD card that I thought I would try to see if it would format and recreate that one. didn't work on either one and the same errors for both.

 

[Bas1234]

And if you point the ICR to that SC?

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[Bas1234]

sorry wrong thread...:-(

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[chaunymony]

lol, I was just going to say I wasn't following you there

 

[amriddle01]

Perhaps it's a dodgy card reader, I had to change mine as it just crashed my PC when reading SD's

ACSS (SME)
APSS (SME)

http://www.ipoffice.tel

 

[chaunymony]

Tried it on 2 different Lenovo's running different OS. I should be able to insert the SD into a reader and format and recreate via manager, correct?

 

[tlpeter]

Try this at own risk!!!

The docs say that if you format it with Windows the SD cards looses the watermark.

I have had one SD card that i was formatting while Manager stopped working with this result.
A non working card which had to be formatted with Windows.

After that i just formatted it again with manager and recreated the SD card.

It then worked as is should do without getting error about a missing license dongle.

This does not work for a normal SD card.

I have it twice with that same dongle and still it is working well.

I must admit that i did a quick format and not a (slow) normal format.

Give it a shot at your own risk, although it is not working anyway.


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

A yard full of tards

 

[chaunymony]

Yeah, that was the reason I haven't formatted the Avaya SD card through Windows yet. I really don't want to go through wiping the feature key off of it and having to get a new one. I also do not want this system to have that fun "lose the config" issue either. Stuck between a rock and a hard place.

 

[tlpeter]

You have no choice to be honest.
It does not work now and you need to swap anyway if you do not format it.
Give it a shot and let me know if i am right.

Do a quick format with Windows (in my case Windows 7 pro) and then with manager and recreate it.


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

A yard full of tards