Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

FAX LINE - Trouble sending and receiving

Status
Not open for further replies.

babytech2009

Technical User
Apr 22, 2009
315
US
Hello,

I have tried several different things regarding the fax moved ports changed fax machines. Still getting line error message and 1 out of 5 faxes will go through.

Could it be something on the analog card itself?
 
i figured it was the pref needed to match the mgclk.
I just tried turning down the dch and loop.
and then tried doing an out and add and also tried a chg in ld 73 after turned dch 14 down.

however the change didnt take.

am I missing something?
 
I just added in ld 73.
I did 0 0 3 mgclk and pref 0 0 3 and sref 0 0 4

it took, can I disable dch 13 loop 22 which is card 0 0 3?
 
You should be able to disable the D-Channel in LD 96: DIS <x> where <x> is the D-Channel number.

Once the D-Channel is disabled, if you want you can also disable the Loop in LD 60: DISL <loop number>.

If you were able to set 0 0 4 as the SREF in the DDB, then if you stat that loop in LD 60, you should see something similar to below:

Code:
PRI*  TRK  LOOP 52 - ENBL 
FFMT/LCMT/YALMT:  ESF/B8Z/FDL 
TRACKING                         <--------- Shows Clock tracking on this loop.
SERVICE RESTORE: YES 
YEL ALM PROCESS: YES 
ALARM STATUS : NO ALARM
CH 01 - IDLE DID  3VCE  *           CH 02 - IDLE DID  3VCE  *          
CH 03 - IDLE DID  3VCE  *           CH 04 - IDLE DID  3VCE  *          
CH 05 - IDLE DID  3VCE  *           CH 06 - IDLE DID  3VCE  *          
CH 07 - IDLE DID  3VCE  *           CH 08 - IDLE DID  3VCE  *          
CH 09 - IDLE DID  3VCE  *           CH 10 - IDLE DID  3VCE  *          
CH 11 - IDLE DID  3VCE  *           CH 12 - IDLE DID  3VCE  *          
CH 13 - IDLE DID  3VCE  *           CH 14 - IDLE DID  3VCE  *          
CH 15 - IDLE DID  3VCE  *           CH 16 - IDLE DID  3VCE  *          
CH 17 - IDLE DID  3VCE  *           CH 18 - IDLE DID  3VCE  *          
CH 19 - IDLE DID  3VCE  *           CH 20 - IDLE DID  3VCE  *          
CH 21 - BUSY DID  3VCE  *           CH 22 - IDLE DID  3VCE  *          
CH 23 - IDLE DID  3VCE  *           CH 24 - DCH 11
 
Thank you very much for all the input.
I got the system to work.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top