Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Error Requesting Data (tpreq) (98) ?????
- Thread starter pctekk
- Start date
enterprisebu
MIS
We get this when the tape in the catlog config is no longer physically in the library.
Try to run a volume ocnfiguration update
right click on media>inventory robot>update volume configuration
Maybe the tapes were ejected then the inventory not ran to sync it all up.
or maybe there's not any tapes left to write to with the correct retention
right click on media>inventory robot>update volume configuration
Maybe the tapes were ejected then the inventory not ran to sync it all up.
or maybe there's not any tapes left to write to with the correct retention
Check the catalog backup configuration.
Does the server selected to create the catalog backup have access to the tape?
If you have multiple libraries then it's possible that the tapes are in the wrong one.
Bob Stump
Incorrigible punster -- Do not incorrige
Does the server selected to create the catalog backup have access to the tape?
If you have multiple libraries then it's possible that the tapes are in the wrong one.
Bob Stump
Incorrigible punster -- Do not incorrige
- Status
Similar threads
- Locked
- Helpful tip