Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

err4291 after outing trunk route 4

Status
Not open for further replies.

oned

MIS
Feb 8, 2005
70
US
We had a trunk route built for mus that I outed with LD14.
We do not use music on hold. Now I get this error ERR4291 25 0. Is there something else that needs to be deleted?
 
You wouldn't happen to know the commands for that do you PERRYPJ?
 
Code:
REQ: CHG
TYPE: FTR
TYPE FTR_DATA
CUST 0
OPT
DGRP
IRNG
PKND
DNDL
SPRE
PREO
BPSS
SRCD
EEST
  DTMF
EESD
TTBL
MUS

then print the routes and check for the mus route

john poole
bellsouth business
columbia,sc
 
Still getting the error ERR4291 25 0.
Does a music route need to be defined?
How can I stop this error message?
 
It may be defined in an ACD or on your trunk routes.

Print your ACD's and print your RDB to see if they have any ref to RT25.
 
You may have some routes defined with MUS YES and ROUT 25 as the music route. Try MUS NO on all the routes in your system. Here is an example of a DID route with MOH (Music On Hold).

ROUT 1
DES DID
TKTP DID
NPID_TBL_NUM 0
SAT NO
RCLS EXT
DTRK YES
DGTP DTI2
DSEL VCE
PTYP DCO
AUTO NO
ICOG ICT
STEP
ACOD 7101
TARG
BILN NO
OABS
INST
MFC R2MF
INDMF NO
MFCI 1
R2MD YES
DIG# 3
SGL YES
BSSU NO
OPP NORM
SWP NORM
ICIS YES
ICNP UKWN
ICNT UKWN
ICPS YES
TIMR MFC 12032
MFO 0
MFID 0
ICF 512
OGF 512
EOD 13952
DSI 499200
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GTO 896
GTI 896
SFB 3
TFD 0
SST 5 0
SCDT NO
2 DT NO
NEDC ORG
FEDC ORG
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR YES
INC YES


PAGE 002

LAST NO
OAL YES
AIA NO
OAN NO
OPD NO
NDP EXC 0
CDRX NO
NATL YES
CFWR NO
IDOP NO
MUS YES
MRT 40
PANS YES
FRL 0 0
FRL 1 1
FRL 2 2
FRL 3 3
FRL 4 4
FRL 5 5
FRL 6 6
FRL 7 7
TTBL 1
PNNC NO
OHTD NO
PLEV 2
OPR NO
RCAL NO
MCTS NO
ALRM NO
BTT 30
NCNI 0
CNIE NO
CNIT NO
CTAT YES
ART 0
OPDL 0
PECL NO
DCTI 0
NADT 0
AACR NO

P. Tilli.
Meridian Programmer
 
piertilli you are exactly correct.Sorry for not knowing what to do but how do I erase the music route from my system (RT25)?
And what is the LD and commands to have all my routes MUS NO?
 
ld 15
chg
ftr
then go down to mus and answer no
then for each of your trunk routes, ld 16 chg rdb and answer mus no, to get a list of trunk routes, ld 21 ltm cust 0 then return through, that will give you all your routes that have trunks built.. then either change them to mus no or prt them in ld 21 prt rdb and see which ones need to have must turned off..

john poole
bellsouth business
columbia,sc
 
Got it guys. Thanks for all your help. Once again you saved my rear.
 
hint i never out anything until after i save a soft copy.. sometimes it's eaiser to put a trunk back in then it is to find out what else i broke.. nortel is not a bill gates machine, when you type out, you don't get a "are you sure" about 10 times.. most of the time that's a good thing. i have put something back in so i could stop the sch/err/bug flood while i found out the same thing you just learned... mus can also be in acd groups (btw)
ld 23
prt
acd
0

return and let them all print, then search for mus

john poole
bellsouth business
columbia,sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top