Embedded VM locking up

[VinylDave]

ip500 v4.05

using embedded vm but i am finding that it locks up, saying all resources in use, every week or so. a reboot doesn't fix but an actual unplug does..

will be upgrading to 407 this week, are there issues with 405 and embedded or has anyone come across the same?

 

[IPhello]

We get it on 4.0(7) as well and have a ticket into Avaya.

 

[VinylDave]

any news back from avaya IPhello?

 

[racom]

I have it happening too on a IP500 4.0.7.

 

[DavidCT]

Ditto. I have it happening on an IPO 500 with 4.0.7.

I notice on my system the CF light on the back of the unit goes dark. Anyone else notice the same?

I logged a call with my distributor who said they have not heard of the problem before, but would kick it up to Avaya (along with hunt group overflow which does not appear to be working correctly).

 

[myalias09]

Same issue. It's always the first they hear of it. I have it on 406v2 3.2.55/upgraded to 3.2.57. Avaya T4 has ticket for 3 months now.

 

[VinylDave]

my site is 350 miles away so i am going tomorrow to physically unplug the unit and plug it back in. also have to run a few traces and send to support.. has anyone done the traces already?

has anyone tried a different vm card?

sounds like a pretty serious issue if you ask me..

 

[optel]

We had the same problem and had to remove the card and replug it. ver 4.05. We had the card replaced from our distribtor and had no futher problems. Re the hunt group overflow we rebuilt the hunt groups and renamed them and problem went away

 

[dcoupal]

Same problem here with me on 4.0(7). What chnages to hunt groups might help?

DC

 

[VinylDave]

thought i had this 1 sorted. i narrowed the fault down to when I did a system config reboot it seemed to lock up all the channels. a physical unplug cleared them.

I just replaced the vm card and it has worked fine for 2 weeks, had to do another restart and it has crashed again.

anyone had any progress with this one?