Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

embedded aa 1

Status
Not open for further replies.

flori1

Technical User
Dec 21, 2004
97
US
On nortel flash and call pilot vm in aa,for instance,"for hours and location press 3" called an info path. How is that done in embedded using "action"
Thanks,Flori





 
Hi Flori
you have to create an additional auto attendant (call it Hours and location) and then send teh option 3 to that auto attendant
You can then in the Hours and location auto attendant have an option go back to the regular auto attendant again if you like.


Joe W.

FHandw, ACSS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top