DSP Resource Usage -How do you read the stats?

[inerguard]

Hi,

If I run the following command to look at DSP resource usage. Can someone tell me how to read it, or how to convert the erlang readings into % resource. Basically I want to know how much DSP resource I am using.


list measurements ip dsp-resource hourly 1

Switch Name:
Date: 1:50 pm TUE DEC 1, 2009
IP DSP RESOURCE HOURLY REPORT

Meas DSP DSP Usage In Reg Out of Denied % % Out
Hour Region Rscs (Erl) Peg Reg Peg Peg Blk of Srv
2200 1 640 1.7 12 0 0 0.00 0.00
2100 1 640 2.4 26 0 0 0.00 0.00
2000 1 640 4.7 27 0 0 0.00 0.00
1900 1 640 6.3 209 0 0 0.00 0.00
1800 1 640 7.9 312 0 0 0.00 0.00
1700 1 640 14.1 512 0 0 0.00 0.00
1600 1 640 40.6 1329 0 0 0.00 0.00
1500 1 640 49.5 1334 0 0 0.00 0.00
1400 1 640 40.3 1446 0 0 0.00 0.00
1300 1 640 24.4 968 0 0 0.00 0.00



[Started on Version 3 software 15 years a go]

 

[4merAvaya]

The attached link is for the Avaya Reports Manual. Beginning on page 143 is the description of the IP Resource reports.

Kevin

http://support.avaya.com/elmodocs2/comm_mgr/R5_2/CM5_2_htmlpages/CM5_2_avayadoc/CM52Reports.pdf

 

[inerguard]

Hi 4mer,

I appreciate the report, which explains all the fields and is a great tool. However, I have CM4 and the "DSP Peak" field isn't available. Typical as this is the only field I really need.

Is there any other way to determine this on CM4.

Thanks

Derek


[Started on Version 3 software 15 years a go]