Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
dimension text
- Thread starter skorche
- Start date
Hi,
Method #1
From the Dimension menu, choose Align Text > Angle.
Select a dimension.
Enter the angle value.
Method #2
On the command line, type dimtedit and press ENTER.
Select a dimension.
Type a for the Angle command option and press ENTER.
Type the angle value and press ENTER.
Method #1
From the Dimension menu, choose Align Text > Angle.
Select a dimension.
Enter the angle value.
Method #2
On the command line, type dimtedit and press ENTER.
Select a dimension.
Type a for the Angle command option and press ENTER.
Type the angle value and press ENTER.
basepointdesignz
Programmer
Do you facing right as in backwards - Mirrored-text?
- Status
Similar threads