Dial Zero Destination

[DisasterMaster]

All of my phones will go to the attendant console whenever anyone dials zero.
I have one analog phone (DN 7656) that needs to go to extension 4545 when someone dials zero from this particular phone.
I think I can do it with the pretranslation feature although I cannot figure out how to program it.
Can anyone offer a solution?

 

[Firebird Scrambler]

This guide of mine is very old, but most of it should still apply.

PRETRAN.TXT
CONFIGURATION OF PRETRANSLATION TABLES OPTION 11 18.40H
>LD 18 08/05/1996
REQ NEW
TYPE SCL
LSNO 0
DNSZ 4
SIZE 10
WRT (ADDS: MEM: 17 DISK: 0.0)
STOR 0 0
WRT
STOR 1 1
WRT
STOR 2 2
WRT
STOR 3 3
WRT
STOR 4 4
WRT
STOR 5 5
WRT
STOR 6 6
WRT
STOR 7 7
WRT
STOR 8 8
WRT
STOR 9 9
WRT
STOR

REQ NEW
TYPE SCL
LSNO 1
DNSZ 4
SIZE 10
WRT (ADDS: MEM: 17 DISK: 0.0)
STOR 0 0
WRT
STOR 1 1
WRT
STOR 2 2
WRT
STOR 3 3
WRT
STOR 4 4
WRT
STOR 5 5
WRT
STOR 6 6
WRT
STOR 7 7
WRT
STOR 8 8
WRT
STOR 9 9
WRT
STOR

REQ NEW #################### (Extensions) #######################
TYPE SCL
LSNO 2
DNSZ 4
SIZE 10
WRT (ADDS: MEM: 17 DISK: 0.0)
STOR 0 4545 ######################### (Number to be dialled if "0" is pressed) #################
WRT
STOR 1
WRT
STOR 2
WRT
STOR 3
WRT
STOR 4
WRT
STOR 5
WRT
STOR 6
WRT
STOR 7
WRT
STOR 8
WRT
STOR 9
WRT
STOR

REQ NEW
TYPE PRE
CUST 0
XLAT 0
PRE 0
PST
SDA
XLAT 1
PRE 1
PST
SDA
XLAT 2
PRE 2
PST
SDA
XLAT
REQ ****

>LD 15
REQ CHG
TYPE CDB
CUST 0
DLDN
TO
CHLN
PREO 1 --------------------------------------- CHANGE TO "1"
FCAF
DASC
ROPT
REQ ****

>LD 11
REQ NEW
TYPE 2616
TN 20 0
DES AAA
CUST 0
AOM
FDN
TGAR
LDN
NCOS
RNPG
SSU
XLST 2
SCPW
SGRP
CLS
HUNT
SCI
AST
IAPG
KEY 0 SCR 2400
MARP
KEY

REQ ****

>

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[DisasterMaster]

won't this affect all phones? Where are you assigning this to the one specific extension?

 

[KCFLHRC]

You assign it per set here

XLST (0)-254 Pretranslation group associated with this
station If the user wants to use a 16-
button DTMF ABCD set as a call forward
destination station to deactivate the call
forward all calls function, then XLST must
be set equal to the

 

[DisasterMaster]

PREO is currently set to 0 in my cdb. Is it possible that PREO could have an adverse effect with any other operation of the PBX if I change it to a 1?
The phone I'm working on is a 500 set. How do you assign a pretranslation group to a 500 set?

 

[DisasterMaster]

I managed to get this to work without breaking anything. Can you explain why I had to create speed call list lsno 0 and lsno 1?

 

[DisasterMaster]

Before I started this I printed a TNB for the entire PBX and found no XLST value assigned to any phone. After I enabled PREO, I found that an XLST value of 0 was assigned to all phones so I realize why Speed Call list LSNO 0 had to be built. I still do not understand why LSNO 2 had to be built. Can anyone shed some light on why LSNO 1 has to be there?