Definity T1 to Active Voice problem

[mlinman]

Hello all,

I have a Definity Prologix connected to an Active Voice Repartee Voice mail system using a crossover T1 cable.

The board on the the Definity is a TN767B. The Active Voice has a Dialogic 240C card.

I created the DS1, on the Definity and then added VMI stations as OPS to the ports on the DS1.

I then created a VDN/Vector to the VMI ports.

It is working fine except for station to station calls.
The calls are intergrating but audio is not cutting through from the Active Voice (I never hear any prompts or beeps but it records my call). External calls and Direct Dial calls work great.

Any ideas?

 

[mlinman]

I got this working, had to shorten the DTMF times in the sys mode page.