Definity: questions from a newbie 2

[avabp2008]

Hi group...I have 2 Avaya cabinets and I have some questions. Are there physical or technical differences...

1: between cabinets labeled A and B or A, B and C in a system ? (other than for programmation)

2: between cabinets labeled:
J58890T
SD-IE654-01
DEF PRLX PKG BTS PORT

and

J58890T
SD-IE654-01
DEF CSI EXP CAB

In other words, can I mix them in order to make one system (I need 2 cabs) with cards like 2402 Processor, 2182 Tone Clock, 793B/2793B Analog Lines and 464GP/2464B pri ? Oufff. I will appreciate any help. Also, I need an installation manual or guide for these boxes. Thank you in advance.

Berny

 

[lopes1211]

For the prologix.......no, there is no difference except there is a dip switch on the rear near the 25 pair connectors which sets the cabinet ID as A, B, C, or unsupported D or E. You just need the proper TDM cable to connect the cabinets and bus terminators on the ends.

-CL

 

[avabp2008]

Thank you lopes1211. I'm waiting replies to my other questions. Youre welcome, hey hey!
Berny

 

[4merAvaya]

Below is the link to the Prologix installation Manual.

Kevin

http://support.avaya.com/elmodocs2/definity/def_r10_new/233118_3/233118_3.pdf

 

[avabp2008]

Thank you very much for this link.

Berny