definity mitel link

[ohyes]

Hi Guys
I have a link between a definity 9.5 and a mitel. When a call is placed from the definity to the mitel , the mitel phone sees the extension of the definity. When the call is placed from mitel to the definity the definity phone sees only the name of the trunk group i.e mitel link. So we are not seeing the cli from the mitel switch. The Mitel guys assure me that they are sending out the cli. It is a Qsig link. I have set up the tsc on the system features page.

Does any one have any ideas.

 

[orypecos]

What kind of Definity trunk group board are u using?

David

P.S. A message to all,if you want to get the best response to a question, please read FAQ222-2244 first. Also give the type and version of your voice mail & pbx system & preview your post to make sure it is complete & understandable. Beware that if u don't answer a question posted to assist u , u will most likely hinder efforts to so

 

[ohyes]

its a ds1