definity card to port

[Guest_imported]

hello could anyone tell me how to assign a digital card to a ports thank you all

 

[Guest_imported]

i called avaya before but they wanted to come and look and that cost to much and i am not good with manuals thanks for the help. Anyone else have an idea? thanks alot

 

[Phoneman2]

Are you just looking to add a Digital card to the switch?
If you have a TN2224b type (Its just a 24 port digital card)
If you have room in the CARRIER (slot)1-18 or so simply side the card in an open spot and lock it in. Then type LI CON A to see if you can see it. PS you will need a amp cable hooked up to the back of the switch and then to the punch down block (wall board). What is the TN on the card?? Wisdom is Knowledge
that is Shared

Thanks All Phoneman2

 

[telcoguy]

The board should be detected automatically.(li con all)
If the board does not show automatically add it with
"change circuit-packs" onto the location you put it in.
Station boards will work right away, for a trunk board it involves a little more work to set it up correctly.


Hope this helps



Rob