Definity Analog Card conflict 2

[2gordo]

I am out of card slots and analog ports on my Definity Cabinet. When I roll theTN746B with TN793B the card goes into Major alarm and in the li conf it says I have a conflict. Can someone please provide me with the proper proceedure for changing out a TN746B 16 port Analog card with a TN793B 24 port analog card?
Thanks
2Gordo

 

[frankieg]

Make all extns on that card an x port, then remove the board and type change cir pack, the board should be missing and this will allow you to insert your new 24 port a-log. Then just add teh extn ports back in , making sure they appear on the right pairs of the patch panel.

 

[Bobg1]

If you don't want to rewire your patch panel, the existing
conections will be on ports 1-4, 9-16, 21-24

 

[2gordo]

Frankieg and Bobg1 thank you for the help. This is my first time using Tek-Tips and won't be the last.
Thanks again
2gordo

 

[Coineandude]

be sure to give them a star for their efforts