JWInstaller
Vendor
Does anyone happen to have a copy of the Release 3.0 DSN software for an Option 11 Mini SSC that they can spare? I have one that has decided to go crazy.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CS1000 Release 3.0 DSN
- Thread starter JWInstaller
- Start date
- Status
Firebird Scrambler
Systems Engineer
I'm assuming that you mean the ap-emea_300_r17.exe or the other releases at 3.0?.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
- Thread starter
- #3
JWInstaller
Vendor
It's in the US, so it would have to be the na-cala_300_r17.exe. The only catch is that it has to have the DSN feature set in it, since it's a military switch. The normal 3.0 software would allow me to use the keycodes.
Firebird Scrambler
Systems Engineer
I've probably got the US software. Not sure if the DSN is in it. Just contact me via the link below if you still require it.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
- Thread starter
- #5
JWInstaller
Vendor
The problem has also spread to a 4.50W DSN switch, so I'm going to open a separate thread to see if anyone has advice. I appreciate your help firebirdscambler.
- Status
Similar threads
- Question