Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

connecting to magix

Status
Not open for further replies.
rileym24

rileym24

Programmer
Joined
May 2, 2006
Messages
1
Location
CA
trying to connect to magix through 355 adapter won't log on, is there a setting in the com port area i need to change or in the software?
 
Sort by date Sort by votes
The WINSPM "SETTINGS" will walk you through the changes to your PC you need to make.

The Legend/Magix is set to go at 2400, N, 8 & 1.

Do not use a "NULL MODEM" cable.
 
Upvote 0 Downvote
just in case you didn't get this to work, I use a USB to 9 pin cable, a gender bender, and an RJ45 to 9 pin adapter with 9' cat 5 patch cord. No problem.
 
Upvote 0 Downvote
Can anyone provide me link for downloading free/ demo
spm software... i dont have any not able to buy from the vendor...

Regards
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Tim8582539
  • Locked
  • Question Question
Connecting a Magix DSS4450 to 4424LD+
Replies
1
Views
210
budbyrd
budbyrd
Tim8582539
  • Question Question
Magix DSS4450
Replies
1
Views
193
TouchToneTommy
TouchToneTommy
TrilokSingh
  • Locked
  • Question Question
MCK w/ Merlin Magix
Replies
1
Views
435
TouchToneTommy
TouchToneTommy
Jim E
  • Locked
  • Question Question
Merlin Magix and Merlin Legend DSS Console
Replies
5
Views
726
orion3311
orion3311
thephonelady
  • Locked
  • Question Question
Magix PRI down
Replies
3
Views
378
merlinman
merlinman

Part and Inventory Search

Sponsor

Back
Top