Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Connecting a 2340 Passport router to a cabletron 520
- Thread starter ReddBaron
- Start date
- Thread starter
- #3
OSPF ???
At the moment I have the an IP bound to each Serial port (The nortel and cabletron) I have PPP encapsulation, It brings up the interface but I cannot ping other serial from the one router or from the other one.
The are in the same subnet, Heck ! I even assigned a whole class C for the two serial ports.) I come from a Cisco background, and from what I see these two are not talking at all.
I have done everything according to the book with no outcome
At the moment I have the an IP bound to each Serial port (The nortel and cabletron) I have PPP encapsulation, It brings up the interface but I cannot ping other serial from the one router or from the other one.
The are in the same subnet, Heck ! I even assigned a whole class C for the two serial ports.) I come from a Cisco background, and from what I see these two are not talking at all.
I have done everything according to the book with no outcome
Is this a new circuit? Could be the telco...What do your CSU's/DSU's indicate? Do you have to set the speed on the Cabletron as you do on an Enterasys?
i.e. for a HSSI card in slot 14/port 1 running at 34Mb:
port set hs.14.1 wan-encapsulation ppp speed 34000000
i.e. for a HSSI card in slot 14/port 1 running at 34Mb:
port set hs.14.1 wan-encapsulation ppp speed 34000000
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question