OrlandoGuy82
Technical User
Does anyone have documentation for configuring a PRI between a Cisco Call Manager and a CS1000. What needs to be in the RDB and all? I can;t find much information on this.
Thank you
Thank you
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Configuring a PRI between Call Manager and CS1000
- Thread starter OrlandoGuy82
- Start date
- Status
tnphoneman
Vendor
Unless Cisco has something then no. Basically you need a PRI set up for QSIG. Remember one side has to be NET and the other USR. Easier for you to set the Nortel for NET than to get Cisco programmers to understand what you are talking about.
No offense to you Cisco programmers but there is alot of catching up to do on telephony acronyms and standards.
No offense to you Cisco programmers but there is alot of catching up to do on telephony acronyms and standards.
- Thread starter
- #5
- Status
Similar threads
- Question