CLS FR2 and DID incomming calls

[johnjose]

CLS FR2 forbids external calls . . . both incomming and outgoing.
How to allow just external DID incomming calls?

Thanks,

jj

 

[bigindian65]

You want to lock that set down, work on NCOS of the phoneset & FRL of your routes. Make that NCOS too low for any route you have and it will not dial out, it will get intercept treatment.

Mato' Was'aka

 

[johnjose]

Thanks for advice. If I understand it correctly there is no solution under CLS FR2. I have to setup CLS TLD, create CRNO table and aasign NCOS to the line.

jj

 

[bigindian65]

I would just look at my RLIs in 86 and see the FRL ofthem, hoefully in the mid range of 0-7 and if your phones are setup globally as NCOS 2 or 3 (hopefully) lower that paticular set lower and you should be good to hook.

Mato' Was'aka

 

[acewarlock]

1st you need to know what your NCOS/FRL relationship is by printing then in LD 87

REQ PRT
CUST 0
FEAT NCTL
enter down until
TYPE NCOS
NCOS 0-7 this will print your NCOS/FRL list then post here

This is really easy if you just take this one step at a time. After you post We will have you do the next print.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[johnjose]

Here is my NCTL print:

REQ prt
CUST 0
FEAT nctl
NRNG 0 7
SCBQ NO

NCOS 0
EQA NO
FRL 0
RWTA NO
CBQ NO
SPRI 0
MPRI 0
PROM 0

NCOS 1
EQA NO
FRL 1
RWTA NO
CBQ NO
SPRI 0
MPRI 0
PROM 0

NCOS 2
EQA NO
FRL 2
RWTA NO
CBQ NO
SPRI 0
MPRI 0
PROM 0

NCOS 3
EQA NO
FRL 3
RWTA NO
CBQ NO
SPRI 0
MPRI 0
PROM 0

NCOS 4
EQA NO
FRL 4
RWTA NO
CBQ NO
SPRI 0
MPRI 0
PROM 0

NCOS 5
EQA NO
FRL 5
RWTA NO
CBQ NO
SPRI 0
MPRI 0
PROM 0

NCOS 6
EQA NO
FRL 6
RWTA NO
CBQ NO
SPRI 0
MPRI 0
PROM 0

NCOS 7
EQA NO
FRL 7
RWTA NO
CBQ NO
SPRI 0
MPRI 0
PROM 0

jj.

 

[acewarlock]

Now you need to find out how many phones use what NCOS.

LD 81
REQ CNT
just return until
NCOS Return until print

Post the reaults of the ones that have at least a count of 1




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[johnjose]

CRNO 0
INIT ALOW
DENY 1
0

CRNO 1
INIT ALOW
DENY 906
909
900
00

CRNO 2
INIT DENY

CRNO 7
INIT ALOW
DENY 906
909
900

 

[acewarlock]

What is this for????




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[johnjose]

7 .. Back office people (denied numbers are “ entertainment voice services”)
1 .. Agents (00 is our access to international network)
2 .. Test – could be our NCOS for DID in calls without external out calls

jj

 

[acewarlock]

Who's question where you answering when you posted this?
it wasn't mine

CRNO 0
INIT ALOW
DENY 1
0

CRNO 1
INIT ALOW
DENY 906
909
900
00

CRNO 2
INIT DENY

CRNO 7
INIT ALOW
DENY 906
909
900





This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.