CLID over Analog 1

[pshook]

I am trying to send CLID from my 81c 6.0 to a BCM50 rls 5.0. Is this possiable or do I need to use PRI?

 

[allenmac]

How are the 2 systems connected?

 

[pshook]

Right now Analog lines from the 81c to analog trunk module in the BCM50.

 

[allenmac]

I'm not sure what you need in the BCM, but the 81c, cannot transmit outbound CLID over analog trunks. For integration with a BCM, I believe you need to either use PRI, or Virtual Trunks with D-Channel.

 

[gwebster]

You probably have the outgoing lines from 81C configured as an analog (500) line which then appears as a loop start trunk on the BCM.

To get CLID on that analog line on the 81C, you need a CMRC card and "Class" ISMs.

 

[allenmac]

gwebster,


That should do it. (star)