Clan Intuity to si cm2.2

[Vmail]

I have heard via Avaya that you must migrate all users of mode-code, and DCIU to Clan with CM2.2.

I have a customer with Definity R9 going to CM2.2. They currently have a octel vmail connected. I don't see a TN765 or mode code on in their config. So how is this talking to the definity now? Thats the first question. Second, Do I need any addl software when they upgrade to 2.2 to allow the integration to work?

Thanks.

 

[Vmail]

Sorry, what we are doing is selling the upgrade to CM2.2 and installing a new Intuity with Clan Integration. Now I know we can IP admin the intuity and now the pbx, because we are adding a TN799DP, but what else if anything do I need on the CM2.2 side? And how is the Octel talking? Is this just straight analog connections?

 

[lopes1211]

Probably using a generic integration method which triggers off of the 1st or last 4 digits of the name display. MWI is send via LWC. There is no software or feature needed on a Definity to make this work and therefore will continue to work on CM2 as long as you continue to put the extension in the name field.

-CL

 

[Vmail]

So it will work, but Avaya won't support it, correct. They are pushing all to Clan integration. CL, Do I need addl software on the pbx, to go to clan integration?

 

[dbijnens]

There is no additional software needed. Your clan integration is for signalling, and there are voice-channels which need to be connected to analog ports of your Definity.
The documentation which comes with the Intuity is ok.
Normally your system should be running after 1 hour of work.