cisco model 870

[malta72]

I would like to make my router Cisco 870 factory d fault

Some can help me to do this

Via cli

Regards
David

 

[malta72]

where there is the xxx what i need to put
router(config)#no ip name-server xxx.xxx.xxx.xxx


Regards
david

 

[malta72]

Hello My frend


Can you please do me small cli scrept what i need to d

i have yes dhcp

Regards
David

 

[JOAMON]

Could you please post your configuration.

 

[malta72]

my frend
can you tell me how can i do this


ferst how can i remove dns old ones

and second how can i put the new ones

Regrds
David

 

[JOAMON]

Router#show run

hit space bar to continue the display.

Copy entire config and paste for review.

 

[malta72]

Hi Joamon

Yes ill will do it to day


Thanks

Regards
David

 

[malta72]

Hello jamon


why i need to past this info here

my ask please

 

[JOAMON]

Can you please do me small cli scrept what i need to d "

Can't make it up out of thin air.....

 

[malta72]

ohhh
ok sorry
i do that for you
no problem

Thanks

 

[malta72]

Hi Jamon


there is any software to make a buck of the show run

Regards
david

 

[JOAMON]

Just copy and paste the DHCP section of the config her for review.

 

[JOAMON]

You might also include the DNS section as well

 

[malta72]

Current configuration : 4668 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname falcon_films
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable secret 5 $1$DgjM$YJE2rBLIBcpt1jKQNkZ1z.
!
no aaa new-model
!
resource policy
!
ip subnet-zero
ip cef

no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1
!
ip dhcp pool sdm-pool1
import all
network 192.168.1.0 255.255.255.0
dns-server 195.158.37.196 194.158.37.211
default-router 192.168.1.1
!
!
ip domain name yourdomain.com
ip name-server 195.158.37.196
ip name-server 194.158.37.211
!
!
crypto pki trustpoint TP-self-signed-1952078995
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1952078995
revocation-check none
rsakeypair TP-self-signed-1952078995
!
!
crypto pki certificate chain TP-self-signed-1952078995

certificate self-signed 01
30820253 308201BC A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31393532 30373839 3935301E 170D3032 30333031 30303335
34395A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 39353230
37383939 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100D58F 8E00529D 9DF06D6C AABB5E1F 6008372C 48FCF645 9FEFC030 D0ADD106
24CCB9F7 CFD1612D 15D84599 57568DB6 9035831F A0BC84B9 74159DDF CC02BA87
4837A8C9 DDC401F3 F50D3049 E49AA6C7 F6752687 A8347A9C 57BB8BE7 2CEA260D
CDCA0BE6 68BB98A2 D38FED0D 056AB77E C15F6F99 A54C0A50 33E13E3C C3C930F9
66590203 010001A3 7B307930 0F060355 1D130101 FF040530 030101FF 30260603
551D1104 1F301D82 1B66616C 636F6E5F 66696C6D 732E796F 7572646F 6D61696E
2E636F6D 301F0603 551D2304 18301680 140D2A00 C1AD01AD 8E684651 8F01352B
A62DEABA 59301D06 03551D0E 04160414 0D2A00C1 AD01AD8E 6846518F 01352BA6
2DEABA59 300D0609 2A864886 F70D0101 04050003 81810008 A59E9CBA 04624979
A83D4717 0328F0CF F411EF1B C8334593 7FD0BC87 BAA18387 E488B500 3BDE9B2C
3AB69E4C 76E36A2E B219D50F 0A2D028E 0CF752EB E6B41C37 EF0F11AD 5CFF0F4E
6E4CE9B2 0E06E367 E904963A 9844D234 7B9E1437 F212B036 92386C2C 823E17AB
07EC347C 1D26B93B 837DF086 34DC772E 05E13041 76FB80
quit
username davidt privilege 15 secret 5 $1$9bUV$TLeVkunbKjYElkVXI8KFb/
!
!
!
!
!
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
description $ES_WAN$
pvc 8/35
pppoe-client dial-pool-number 1
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3

interface Dot11Radio0
no ip address
shutdown
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0
54.0
station-role root
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
interface Dialer0
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username mldt@maltanet password 7 09484F1F1001
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
!
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 5 life 86400 requests 10000
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source list 5 interface Dialer0 overload
ip nat inside source static tcp 192.168.1.5 113 interface Dialer0 113
ip nat inside source static tcp 192.168.1.5 21 interface Dialer0 21
ip nat inside source static tcp 192.168.1.2 80 interface Dialer0 80
ip nat inside source static tcp 192.168.1.2 110 interface Dialer0 110
ip nat inside source static tcp 192.168.1.2 25 interface Dialer0 25
ip nat inside source static tcp 192.168.1.5 1024 interface Dialer0 1024
ip nat inside source static tcp 192.168.1.5 5000 interface Dialer0 5000
!
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 192.168.1.0 0.0.0.255


access-list 5 remark NAT
access-list 5 permit 192.168.0.0 0.0.0.255
access-list 10 permit 192.168.1.3
dialer-list 1 protocol ip permit
snmp-server community public RW
snmp-server community david RO
no cdp run
!
control-plane
!
banner login ^CAuthorized access only!
Disconnect IMMEDIATELY if you are not an authorized user!^C
!
line con 0
login local
no modem enable
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
!
scheduler max-task-time 5000
end




Here you fine the file you ask me for

Regards
David

 

[JOAMON]

From the router# prompt copy and paste the following:

conf t
no ip name-server 195.158.37.196
no ip name-server 194.158.37.211
ip name-server 194.204.96.1 194.204.96.3
ip dhcp pool sdm-pool1
no dns-server 195.158.37.196 194.158.37.211
dns-server 194.204.96.1 194.204.96.3
exit
exit
wri

A reboot of the PC's will have to happen in order to get the new DNS information. Hope this was helpful.

 

[malta72]

Thanks for all the help


Know i need to configer this


I need to do port fowarding

to ports

smtp port 25

pop port 110

113

port 1024 5000 port range

Can you help me in this my frend

thanks

 

[JOAMON]

I would start a new port for that and see if someone a little better at that than I will answer.

 

[JOAMON]

New post....cant type wery vell

 

[malta72]

Sorry my frnd I don’t understand you


Can you exply me

Regards
David

 

[JOAMON]

Start a new thread titled "Cisco 870 Port Forward Help" and see if someone that is better at this type of configuration will reply.

 

[malta72]

Ok thanks for all the info my frend