Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cisco 800 series with Bellsouth DSL 1

Status
Not open for further replies.

br0ck

MIS
Apr 25, 2002
467
US
I am getting bellsouth (local ISP in Miami) DSL in my new location. Thy normally use Netopia modems/router and use PPPoE. Bellsouth has stated that they will not support any other hardware and that i am on my own to get it running.
I want to setup either a 800 series intergraded router or a 1720 with a DSL WIC.

my questions are:

where do i start to get it going. Can cisco support this configuration with a smartnet?

Where can i find documentation on setting up a DSL connection.

TIA



 
...pretty easy..dont let bellsouth scare you..they never support sh*&!

..you can look at your netopia and verify the atm/pvc stuff

..the below config is working on my 2620 dsl connection to bellsouth..this should be comparable to 1720 or 800 series..

..of course you will want to get spun up on IOS firewall and get the IOS firewall feature set..

interface ATM0/0
description ADSL to Bellsouth
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
dsl operating-mode auto
hold-queue 224 in
!
interface ATM0/0.1 point-to-point
no ip unreachables
pvc 8/35
dialer pool-member 1
protocol ppp dialer

interface Dialer1
mtu 1492
ip address negotiated
ip access-group 111 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip nbar protocol-discovery
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname xxxxxxxxxx@bellsouth.net
ppp chap password 7 xxxxxxxxxxxxxx
ppp pap sent-username xxxxxxxxx@bellsouth.net password 7 xxxxxxxxxxxxxx

ip route 0.0.0.0 0.0.0.0 Dialer1

access-list 1 permit 192.168.100.0 0.0.0.255


...there is a heck of a lot of documentation on the cisco website..


CCNP,CCSP,MCSE,Sec+,Net+,A+...
 
Awsome.. that is just what im looking for

 
Any advice on what ADSL WIC to use with Bellsouth?

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top