Changing Intuity switch integration

[wellco]

We have a Intuity Audix that was used on a Legend, and would like to be able to change it to use on another system, Does anyone have a suggestion as to where to find "switch library" or whatever is needed to change it for another switch integration. Thanks

 

[orypecos]

What kind of telephone system are u going to connect it to?

 

[wellco]

We are thinking of using on an old Sys 25 that has an Active Voice on it now that is on it's last leg...Any help?

 

[orypecos]

I work on Definitys so I don't know for sure, but I believe that S25 uses modes codes, so u wouldn't have to change the intergration.
If u use the Intuity on Definity, then u can use mode codes, dciu link, or c lan.

 

[wellco]

orypecos.....
You are correct...the 25 does us mode codes as I can remember, only ? we had is if the Legend int. that is currently loaded into the Intuity will case problems with the 25 being able to talk correctly with it...it's a 6 port with analog integration, so probably will be ok...anything else you could think of? thanks

 

[aussie88]

Wait a minute. The "send message" codes for the Sys25 may very well differ from the ones on the LEgend. You may haave to rig it a bit to get the message lights to work.

 

[wellco]

Your right...that was one of my concerns..but am unable to see any place on Intuity where I can change the codes...ie: *4 #4 Any idea's where that can be changed if it can be?

 

[orypecos]

To set parameters that determine how the system performs MWI updates:
1. Start at the Lucent Intuity Main Menu and select:
Switch Interface Administration
Call Data Interface Administration
MWI Administration
MWI Parameters