Centrex lines on Mics

[AyaaNort]

Mics system currently with primus on centrex lines has 9 lines 1 main, 1 back line to check voicemail rest on hunt lines. want to switch to regular bell lines, will this be a problem if we keep same number of lines? and will additional programming be required after the switch?

 

[SYQUEST]

What changes you may need depend on the Centrex configuration you currently have. Is 9 required when placing calls on the Centrex lines or are they setup with "ASSUME 9"?

....JIM....

 

[AyaaNort]

They give out one main number to the customer, and then if that's busy that rolls over to the other lines, and one is for fax, also 1 number is used for their personal in/out calls. You do not need to press 9 when placing calls...Thankx in advance for the help

 

[AyaaNort]

Also to add the software version is sp 30ncCG, which makes it a R1T1 triangular ver 1