CDR over the LAN?

[Zu56]

Hi all,
Definity G3si V12
I'm trying to migrate from serial connection to LAN in my call accounting system. Have C-LAN installed and working. Set output to CDR1 in "ip-services", in "sys cdr" set primary output as CDR1, format expanded and had CAS vendor to make changes in their software to IPlisten. CAS software saw the connection but could not get any data.
Is the solid way to verify that the data is coming out of the switch via LAN? Does it matter what port to send the data to?
Thank you

 

[mikeydidit]

Try using port 5101 for your CDR.

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594

 

[Zu56]

5101 as the "remote port" in ip-services screen?

 

[mikeydidit]

Yes that is how my MicroCall is set up.

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594

 

[Zu56]

I did that. When I restarted CAS (Cash+) it said port 5101 connected but did not show any data coming in and after a while (20-30 seconds)it looked like it has lost the connection, because it started to flash "waiting for connection." Vendors are puzzeled and they keep saying that this is the switch problem. Do you know the way to verify that the data is sent from the switch? Did I miss anything in "sys cdr" screen?
Thank you
It is easy when everything works...

 

[mikeydidit]

change system-parameters cdr                                    Page   1 of   1
                            CDR SYSTEM PARAMETERS

 Node Number (Local PBX ID): 1                     CDR Date Format: month/day
      Primary Output Format: expanded      Primary Output Endpoint: CDR1
    Secondary Output Format:
           Use ISDN Layouts? n
       Use Enhanced Formats? n      Condition Code 'T' For Redirected Calls? n
Modified Circuit ID Display? n                  Remove # From Called Number? n
                  Record Outgoing Calls Only? n            Intra-switch CDR? y
  Suppress CDR for Ineffective Call Attempts? y     Outg Trk Call Splitting? y
      Disconnect Information in Place of FRL? n       Outg Attd Call Record? y
                                                     Interworking Feat-flag? y
 Force Entry of Acct Code for Calls Marked on Toll Analysis Form? n
                                    Calls to Hunt Group - Record: group-ext
Record Called Vector Directory Number Instead of Group or Member? n
Record Agent ID on Incoming? n       Record Agent ID on Outgoing? y
     Inc Trk Call Splitting? n
  Record Non-Call-Assoc TSC? n           Call Record Handling Option: warning
      Record Call-Assoc TSC? n   Digits to Record for Outgoing Calls: dialed
   Privacy - Digits to Hide: 0               CDR Account Code Length: 3

This is how my system is set up capturing data through the C-LAN and connecting to MicroCall.

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594

 

[nohuhu]

Zu56,

try changing "reliable protocol" setting on ip-services third page.

 

[mikeydidit]

dwalin "You have mail" Good to see you on here brother.

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594

 

[nohuhu]

mikeydidit,

thanks, i found it. my spam fighter program gets too anxious sometimes. it's good to see you too.

 

[Zu56]

Thank you, guys.
I changed "reliable protocol" to "no" and started to get some information. It does not look like it is in the right format, but at least I'm getting something I can work with.

 

[Zu56]

mikydidit,
How can I post a screnshot from ASA?
Thank you

 

[mikeydidit]

Highlight and copy. Then paste as a reply and use

 to before and after use [/code ]. It keeps it somewhat uniform that way. 

Hell, there are no rules here - we're trying to accomplish something. 
Thomas A. Edison 

For the best response to a question, read faq690-6594

 

[Zu56]

I can not see any way to highlight any information on the screen execept for only one fiel at a time.
Could it be because I'm using ASA 2.1.11.
Thanks

 

[mikeydidit]

Try this. Go to the bottom of the page you are trying to copy and hold the left mouse button down and go to the left and up with it. It should highlight it for you. Then right click and hit copy.

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594

 

[Zu56]

Everything sounds right and works for any other window, but not for ASA. Could it be related to the default emulater setup?

 

[lopes1211]

Sounds like you are using "GEDI" instead of "START EMULATION". Copy wont work in GEDI.

-CL

 

[Zu56]

Right. Thank you