Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CDR description

Status
Not open for further replies.

jensjuul

Programmer
Jul 28, 2007
50
DK
Hi,

I've just enable CDR on my Meridian and I just have a question:

I understand the N-record, that's just at normal call from a to b, but I get a lot of S, Q and E records. Do you know a simple description og explaination to what these record types are?

Thank you very much.
 
Record Description Page
A Authorization Code 251
B Abandoned Call 241
C Charge 252
D Station Activity 259
E End 250
F Connection (for ACD calls which are conferenced) 255
G Internal Meridian 1 Packet Handler data call 259
H External Meridian 1 Packet Handler data call 259
I Initialization 251
L Internal Call 257
M Charge for Conference 254
N Normal 241
P Calling Party Number 255
Call Detail Recording Description and Formats
B record (Abandoned call)
B records (Abandoned call) are output when the Time to Answer feature is
active and New Format CDR is selected for CDR TTY output
(FCDR = NEW in LD 17). B records are only output to CDR Teletype
devices.
B records are output when:
• an unanswered incoming trunk disconnects and ABAN = YES in LD 16
• Internal CDR is equipped and an unanswered internal station disconnects
from another internal station which has ABDA class of service
With the CDR on Busy Tone feature, a B record is produced when the
originator of an incoming or internal call disconnects after receiving a busy
tone. The CDR on Busy Tone B record information is displayed on the third
line of the CDR B record when the New CDR format (FCDR) is configured.
N (Normal) record
An N record (Normal record) is generated when a simple call is established,
whether or not it is extended through the Attendant Console, and when no
other phone feature is activated.
Q Connection (for calls connecting a trunk and an ACD
Agent)
255
R Connection (for ACD calls which are transferred) 255
S Start 246
T Time stamp 251
X Transfer 249
Y Public Network Feature Invocation 260
 
Thank you so very much!!

What is the difference between a normal N record and a call that generates a S and E record?
 
I think the S & E will show for calls that had something done with them such as Transfer, Conf, ect..
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top