Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
can i add parameters for a schedule report
- Thread starter sonny1974
- Start date
- Thread starter
- #2
also, when i preview a different report , it works, but when i scedule it it errors with this message
Status: Failed
Printer: The instance is not printed.
External Destination: None
Data Refresh Settings: Use the server defaults.
Start Time: 4/27/07 2:32:06 PM
End Time: 4/27/07 2:32:06 PM
Server Used:
Error Message: Object failed to run due to insufficient security privileges.
Status: Failed
Printer: The instance is not printed.
External Destination: None
Data Refresh Settings: Use the server defaults.
Start Time: 4/27/07 2:32:06 PM
End Time: 4/27/07 2:32:06 PM
Server Used:
Error Message: Object failed to run due to insufficient security privileges.
sonny:
RE: Question 1: Before you actually schedule a report, from the Central Management Console select the report, select the "Process" tab and the "Parameters" link under that tab, and enter the appropriate parameter information. Once that's done, anytime you schedule the report to run, it should use those parameter values/assignments. (Note: You'll have to have permissions/access to modify the report parameters, which means you may have to log into the CMC using an Admin account.)
RE: Question 2: Make sure that the account under which you are scheduling the report has access to do so. Again, going into the CMC, select the report in question and go to the "Rights" tab. Under that tab should be a list of all the user groups you have. At this point you'll basically have to determine what account(s)/group(s) should have access to schedule reports, and select those accounts/groups and drill-down into their respective rights and select to Grant the scheduling right.
Hope that makes sense and helps!
-- Creator of the XModuleSB Application: --
RE: Question 1: Before you actually schedule a report, from the Central Management Console select the report, select the "Process" tab and the "Parameters" link under that tab, and enter the appropriate parameter information. Once that's done, anytime you schedule the report to run, it should use those parameter values/assignments. (Note: You'll have to have permissions/access to modify the report parameters, which means you may have to log into the CMC using an Admin account.)
RE: Question 2: Make sure that the account under which you are scheduling the report has access to do so. Again, going into the CMC, select the report in question and go to the "Rights" tab. Under that tab should be a list of all the user groups you have. At this point you'll basically have to determine what account(s)/group(s) should have access to schedule reports, and select those accounts/groups and drill-down into their respective rights and select to Grant the scheduling right.
Hope that makes sense and helps!
-- Creator of the XModuleSB Application: --
- Status
Similar threads
- Locked
- Question