Aug 5, 2008 #1 tech2233 Vendor Joined Sep 1, 2005 Messages 104 Location CA Does anyone know if Caller ID gets passed to an analog station on IPO ?
Aug 5, 2008 #2 jamie77 Programmer Joined Oct 15, 2004 Messages 4,523 Location GB yes it does Jamie Green ACA:Implement - IP Office ACS:Implement - IP Office http://www.alliedcom.co.uk Football is not a matter of life and death-It is far more important!!!! Upvote 0 Downvote
yes it does Jamie Green ACA:Implement - IP Office ACS:Implement - IP Office http://www.alliedcom.co.uk Football is not a matter of life and death-It is far more important!!!!
Aug 6, 2008 #3 amriddle01 Programmer Joined May 2, 2007 Messages 23,938 Location GB It will delay the Handset by one ring cycle as it passes the CLI on though. ACS - IP Office Implement Upvote 0 Downvote
It will delay the Handset by one ring cycle as it passes the CLI on though. ACS - IP Office Implement
Aug 6, 2008 #4 mforrence Vendor Joined Aug 7, 2004 Messages 2,239 Location US And it must be enabled within the Extension tab Upvote 0 Downvote
Aug 6, 2008 #5 janni78 IS-IT--Management Joined Aug 25, 2005 Messages 5,125 Location SE there a bug though that CLI don't get passed to analog extensions on POTv2 modules that should be fixed in the latest release. don't remember in what software this bug came. Upvote 0 Downvote
there a bug though that CLI don't get passed to analog extensions on POTv2 modules that should be fixed in the latest release. don't remember in what software this bug came.