tarheel25
IS-IT--Management
- Dec 31, 2002
- 113
Is it possible for a set that is on a 824 system with DID numbers to be available to screen the calls to the DID numbers?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call Screening
- Thread starter tarheel25
- Start date
- Status
The Norstar has no internal provisions for caller ID on analog DID trunks. You may be able to do it with an external caller ID device (assuming your carrier is able to send CID data on analog DID's) but that would mean each station requiring CID info would need the additional device and wiring.
Going way back in my memory banks, I do remember that Nortel originally came out with a funky old caller ID unit for the 6/16's and 8/24's. It looked like an ATA and it only gave the CID info to one set as I recall. Haven't seen or heard of one in over 15 years though.
Phonehed in Dallas
Going way back in my memory banks, I do remember that Nortel originally came out with a funky old caller ID unit for the 6/16's and 8/24's. It looked like an ATA and it only gave the CID info to one set as I recall. Haven't seen or heard of one in over 15 years though.
Phonehed in Dallas
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question