sc00byd0034
Programmer
i have ound in one manual that call recording can be done by pressing feature 989 but when i do that is says access is denied. where would i go to allow that. any help would be greatly appreciated. thank you
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MikeeOK on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
call recording 1
- Thread starter sc00byd0034
- Start date
- Status
-
1
- #2
Call recording is accomplished through the CallPilot and must be allowed in COS.
- Thread starter
- #3
sc00byd0034
Programmer
i looked everywhere in the programing book for where to allow it and i couldn't fing where you would allow that or what program cos is in. they also have a voice mail on the system. can they recorded calls be saved there or do you need aditional equipment to save the calls?
The calls are saved in your mailbox.. But I repeat you must have a CallPilot.
This can also be activated in the NAM R4. The voicemail class-of-service must be edited to allow call recording. Which voicemail do you have, and what is the release?
Brian Cox
Brian Cox
- Thread starter
- #6
sc00byd0034
Programmer
th voicemail is version 4.1.05. and from what i have read is that you need a program on a computer to program the system that way in order to change the settings in the cos. is that the only way to change that or can you do it through the phone. if so where could it get that program and how does it hook up to the voicemail. thank you
DigitalMind
Programmer
Wow I didn't know about that secret menu Silver987 .. THANKS !
phoneguy427
Technical User
Only added on 4.1 because norstar voicemail manager doesn't work with XP or 2000.
When in doubt RTFM (read the friggin manual)
When in doubt RTFM (read the friggin manual)
- Status
Similar threads
- Locked
- Question